| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.070 INCHES MINIMUM AND 5.110 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PIN OVERALL DIAMETER | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 6.670 INCHES MINIMUM AND 6.750 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SURFACE FINISH | 250.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |