| DIAMETER | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.040 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 303PB OR STEEL COMP 303 OR STEEL COMP 416 OVERALL |
| PIN HEAD DIAMETER | 0.210 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MCP 5,76050 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDERCUT DIAMETER | 0.164 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.070 INCHES NOMINAL |
| UNDER HEAD LENGTH | 1.950 INCHES MINIMUM AND 1.980 INCHES MAXIMUM |