|
|
|
National Stock Number:
5315-00-522-4792
Federal Supply Class:
5315
National Item Identification Number:
005224792
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 90-1050-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.570 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.230 INCHES NOMINAL | | FIRST END LOCATION | SHORT SHANK END | | FIRST HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 2.060 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8630 OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.180 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.097 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.373 INCHES NOMINAL | | SECOND SHANK LENGTH | 1.580 INCHES NOMINAL | | SHANK DIAMETER | 0.300 INCHES NOMINAL | | SHANK LENGTH | 0.400 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 80.0 MICROINCHES LARGE SHANK | | SURFACE TREATMENT | CHROMIUM OVERALL |
|
|