| EFFECTIVE LENGTH | 1.078 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| DIAMETER | 0.7858 INCHES MINIMUM AND 0.7863 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.964 INCHES MINIMUM AND 2.974 INCHES MAXIMUM |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST HOLE DIAMETER | 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-11415,CL B2,CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| SPECIAL FEATURES | SECOND OPTIONAL END AND CORNER RADIUS,STYLE 4,0.016 DEGREES NOM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS |
| SURFACE FINISH | 63.0 MICROINCHES SHANK END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDERCUT DIAMETER | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 3.187 INCHES NOMINAL |