|
|
|
National Stock Number:
5315-00-517-4501
Federal Supply Class:
5315
National Item Identification Number:
005174501
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5174501 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | XX002-1649 | H2229 | RDM TECHNOLOGY B.V. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-P-416,TY 3,CL 3 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | CADMIUM OR | | PHOSPHATE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.101 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.101 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.859 INCHES MINIMUM AND | | 0.891 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 1.109 INCHES MINIMUM AND | | 1.141 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2470 INCHES MINIMUM AND | | 0.2510 INCHES MAXIMUM |
|
|