|
|
|
National Stock Number:
5315-00-517-3390
Federal Supply Class:
5315
National Item Identification Number:
005173390
Description:
KEY,MACHINE
Detail:
A metallic item, usually square or rectangular in cross section, usually longer in relation to its width and thickness, with or without a head, usually designed to fit into the pre-cut slots of two adjacent cylindrically shaped members, to prevent relative rotational movement between the two. It may have mounting holes or slots.
|
Manufacturer Information:
| 5173390 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | PLAIN | | OVERALL LENGTH | 0.594 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | OVERALL HEIGHT | 0.240 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | OVERALL WIDTH | 0.494 INCHES MINIMUM AND | | 0.499 INCHES MAXIMUM | | MOUNTING HOLE TYPE AND QUANTITY | 1 UNTHREADED-COUNTERSUNK | | MOUNTING HOLE DIAMETER | 0.187 INCHES MINIMUM AND | | 0.203 INCHES MAXIMUM | | DISTANCE FROM MOUNTING HOLE CENTER TO END | 0.312 INCHES NOMINAL | | MOUNTING HOLE DEPTH | 0.240 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | | STARTING EDGE SHAPE | STRAIGHT | | SPECIAL FEATURES | 0.218 IN. LG BY 0.370 IN. W RECTANGLE CENTERED ON SQUARE END,BOTTOM EDGECHAMFERED 0.094 IN.BY 45.0 DEG | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 5173390 |
|
|