|
|
|
National Stock Number:
5315-00-516-0355
Federal Supply Class:
5315
National Item Identification Number:
005160355
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1227M1 | 56442 | DIAMOND REO TRUCK CO | | 12EHW14 | 76040 | MACK TRUCKS INC PARTS OPN | | 182399 | 08683 | BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC | | 1846K37 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 1846K37 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 2797P42 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 2797P42 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | F4399 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | F4399A | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | F4399B | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | FC4399 | 56442 | DIAMOND REO TRUCK CO | | FC4399 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | FC4399A | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | FC4399B | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV |
|
Techincal Specification:
| FIRST END LOCATION | LONG END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | HARDNESS RATING | 70.0 ROCKWELL B MAXIMUM OVERALL | | OVERALL LENGTH | 2.031 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.307 INCHES MINIMUM AND 0.309 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.6277 INCHES MINIMUM AND 0.6307 INCHES MAXIMUM | | SHANK DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SHANK LENGTH | 0.6277 INCHES MINIMUM AND 0.6307 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.438 INCHES NOMINAL | | SPECIAL FEATURES | FLAT OF LARGER DIA END OF SHANK IS DRILLED 0.219 IN. DIA 0.250 IN. DEEP | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
|
|