|
|
|
National Stock Number:
5315-00-494-7644
Federal Supply Class:
5315
National Item Identification Number:
004947644
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 8-10666-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 8-10666-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 8-10666-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | LONG END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | OVERALL LENGTH | 1.310 INCHES MINIMUM AND 1.350 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | POINTED | | SECOND END TAPER ANGLE | 60.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.185 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.250 INCHES NOMINAL | | SECOND SHANK LENGTH | 0.780 INCHES NOMINAL | | SHANK DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SHANK LENGTH | 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM | | SHOULDER WIDTH ACROSS FLATS | 0.438 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.450 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|