|
|
|
National Stock Number:
5315-00-492-3652
Federal Supply Class:
5315
National Item Identification Number:
004923652
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 47A16230 | 80049 | DEPARTMENT OF THE AIR FORCE | | 47A16230 | 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.594 INCHES MINIMUM AND 3.656 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL LENGTH | 4.219 INCHES MINIMUM AND 4.281 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | SURFACE TREATMENT | ZINC OVERALL |
|
|