| CENTER TO CENTER DISTANCE BETWEEN HOLES | 21.140 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.600 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 22.320 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 OVERALL |
| SPECIAL FEATURES | ANGLE BETWEEN CENTERLINES OF HOLES 90.0 DEGREES |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| SHANK LENGTH | 2.450 INCHES NOMINAL |
| SHANK DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |