| CRITICALITY CODE JUSTIFICATION | AAVH |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.083 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | DRILLED SHANK THREADED PIN |
| OVERALL LENGTH | 1.733 INCHES MINIMUM AND 1.765 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 10.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| SHANK DIAMETER | 0.250 INCHES NOMINAL |
| SHANK LENGTH | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.3739 INCHES MINIMUM AND 0.3744 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 125.000 MICROINCHES OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |