|
|
|
National Stock Number:
5315-00-480-8142
Federal Supply Class:
5315
National Item Identification Number:
004808142
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 3012T64P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN OVERALL DIAMETER | 0.1557 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.550 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | THREADED AND COUNTERBORED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | SPECIAL FEATURES | TAP DRILL END .23 MAX DP,80 - 120 DEG CSK .08-.10 IN. DIA,.086-56UNC-2B THD,.09 IN. MIN FULL THD DEPTH | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|