| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.953 INCHES MINIMUM AND 0.983 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.025 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 4.330 INCHES MINIMUM AND 4.370 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MMS124 7AL-4MOTI76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | TITANIUM OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND UNDERCUT WIDTH | 0.042 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.406 INCHES MINIMUM AND 0.426 INCHES MAXIMUM |
| SHANK LENGTH | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| STYLE DESIGNATOR | UNDERCUT |
| SURFACE FINISH | 63.000 MICROINCHES OVERALL |
| UNDERCUT DIAMETER | 0.312 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.042 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |