|
|
|
National Stock Number:
5315-00-470-1226
Federal Supply Class:
5315
National Item Identification Number:
004701226
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 13212E5463-2 | 97403 | CECOM LR CENTER | | LT1-376 | 03677 | ANTHONY YORK CO | | W69065 | 04285 | ATHEY PRODUCTS CORP |
|
Techincal Specification:
| CHAMFER LENGTH | 0.625 INCHES NOMINAL | | DIAMETER | 1.499 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO FLAT | 1.000 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.812 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD STYLE | DEE | | HEIGHT | 0.500 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1040 OR STEEL COMP 1041 OR STEEL COMP 1042 OR STEEL COMP 1043 OR STEEL COMP 1044 OR STEEL COMP 1045 OVERALL | | PIN HEAD DIAMETER | 2.718 INCHES MINIMUM AND 2.781 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | SPECIAL FEATURES | UNDERCUT TOP 0.250 IN.DEEP W/1.500 DIA. | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 32.0 MICROINCHES LONG SHANK | | UNDER HEAD LENGTH | 11.750 INCHES NOMINAL |
|
|