|
|
|
National Stock Number:
5315-00-462-8347
Federal Supply Class:
5315
National Item Identification Number:
004628347
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10225472 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 457-5618 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.094 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.284 INCHES MINIMUM AND | | 0.294 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.546 INCHES MINIMUM AND | | 0.548 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS | | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.125 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1845 INCHES MINIMUM AND | | 0.1850 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 10225472 |
|
|