| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.949 INCHES MINIMUM AND 1.969 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | DRILLED SHANK THREADED PIN |
| OVERALL LENGTH | 2.070 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OVERALL |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| SHANK DIAMETER | 0.500 INCHES NOMINAL |
| SHANK LENGTH | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.6377 INCHES MINIMUM AND 0.6379 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD LENGTH | 0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |