|
|
|
National Stock Number:
5315-00-461-1651
Federal Supply Class:
5315
National Item Identification Number:
004611651
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10122648 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3M39C3-19 | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | LD122-0022-0319 | 43999 | THE BOEING COMPANY | | 3M39C3-19 | 56878 | SPS TECHNOLOGIES, LLC | | 3M39C3-19 | 76301 | THE BOEING COMPANY | | P053-3-19 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.725 INCHES MINIMUM AND | | 0.745 INCHES MAXIMUM | | DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.062 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.375 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.083 INCHES MINIMUM AND | | 0.123 INCHES MAXIMUM |
|
|