|
|
|
National Stock Number:
5315-00-460-2967
Federal Supply Class:
5315
National Item Identification Number:
004602967
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 60A52C58-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 431 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.074 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.074 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.436 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.625 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.2480 INCHES MINIMUM AND | | 0.2490 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 30003 | | DESIGN CONTROL REFERENCE | 60A52C58-1 |
|
|