|
|
|
National Stock Number:
5315-00-453-7504
Federal Supply Class:
5315
National Item Identification Number:
004537504
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| LS5971T3-012 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.750 INCHES NOMINAL | | DIAMETER | 0.184 INCHES MINIMUM AND | | 0.186 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | TITANIUM ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047 TY 3 COMP A-6A1-4 V MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STP-58-001,TY 2,CL 2,FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.030 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 14.0 DEGREES MINIMUM AND | | 15.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.296 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | HEIGHT | 0.050 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | LS5971T3-012 |
|
|