|
|
|
National Stock Number:
5315-00-449-2940
Federal Supply Class:
5315
National Item Identification Number:
004492940
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 882676-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 882676-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | SS882676-1 | 59915 | SERVICE & SALES INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP E52100 OR | | STEEL COMP 316L OR | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 430 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 316 OR | | STEEL COMP 310 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-854 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.040 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.050 INCHES NOMINAL | | PIN OVERALL LENGTH | 0.590 INCHES MINIMUM AND | | 0.600 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0940 INCHES MINIMUM AND | | 0.0950 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 882676-1 |
|
|