|
|
|
National Stock Number:
5315-00-114-1534
Federal Supply Class:
5315
National Item Identification Number:
001141534
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 768-5881-002 | 13499 | ROCKWELL COLLINS, INC. | | 768-5881-002 | 95104 | ALCATEL-LUCENT HOLDINGS INC. |
|
Techincal Specification:
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468,GROUP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.077 INCHES MINIMUM AND | | 0.081 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.312 INCHES NOMINAL | | SHANK DIAMETER | 0.254 INCHES MINIMUM AND | | 0.256 INCHES MAXIMUM | | OVERALL LENGTH | 1.882 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.247 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.069 INCHES MINIMUM AND | | 0.073 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | COUNTERBORED W/O THRU HOLE | | SECOND END COUNTERBORE DIAMETER | 0.106 INCHES NOMINAL | | FIRST END LOCATION | CHAMFERED END | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.053 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.053 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.424 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.080 INCHES NOMINAL | | SPECIAL FEATURES | ITEM HAS A TOTAL OF 9 HOLES EQUALLY SPACED |
|
|