|
|
|
National Stock Number:
5315-00-096-2781
Federal Supply Class:
5315
National Item Identification Number:
000962781
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| BS1118PC110 | 63857 | CIRCOR NAVAL SOLUTIONS LLC | | BS1119 | 63857 | CIRCOR NAVAL SOLUTIONS LLC | | BS1193PC110 | 63857 | CIRCOR NAVAL SOLUTIONS LLC | | BS1195PC110 | 63857 | CIRCOR NAVAL SOLUTIONS LLC | | BS5-1766PC132 | 63857 | CIRCOR NAVAL SOLUTIONS LLC | | VD-3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | VD3 | 63857 | CIRCOR NAVAL SOLUTIONS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1211 OR | | STEEL COMP 1212 OR | | STEEL COMP 1213 OR | | STEEL COMP B1111 OR | | STEEL COMP B1112 OR | | STEEL COMP B1113 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18411,CL 2 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | HARDNESS RATING | 320.0 BRINELL STANDARD NOMINAL OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.032 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.109 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.1160 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.188 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.500 INCHES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 4.875 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.6230 INCHES MINIMUM AND | | 0.6240 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | 0.116 IN. HOLE IS 0.188 IN. DEEP |
|
|