|
|
|
National Stock Number:
5315-00-087-9553
Federal Supply Class:
5315
National Item Identification Number:
000879553
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS16555-645 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16555-645 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM16555 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR | | ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 4000 DOUBLE POUND | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.333 INCHES NOMINAL | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND | | 16.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SECOND END CORNER RADIUS | 0.062 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.490 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1876 INCHES MINIMUM AND | | 0.1878 INCHES MAXIMUM | | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25 DEG |
|
|