|
|
|
National Stock Number:
5315-00-083-7117
Federal Supply Class:
5315
National Item Identification Number:
000837117
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| LS5971T5-018 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.125 INCHES NOMINAL | | DIAMETER | 0.308 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047 COMP 6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STP58-001 TYPE 2 CLASS 2 FSCM 98897 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.030 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND | | 15.5 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.420 INCHES MINIMUM AND | | 0.452 INCHES MAXIMUM | | HEIGHT | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | LS5971T5-018 |
|
|