|
|
|
National Stock Number:
5315-00-081-7019
Federal Supply Class:
5315
National Item Identification Number:
000817019
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315000817019 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315000817019 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS20392-3C71 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-3C71 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| UNDER HEAD LENGTH | 2.350 INCHES MINIMUM AND | | 2.370 INCHES MAXIMUM | | DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4037 OR | | STEEL COMP 4130 OR | | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8695 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.062 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.375 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.103 INCHES NOMINAL |
|
|