|
|
|
National Stock Number:
5315-00-044-4193
Federal Supply Class:
5315
National Item Identification Number:
000444193
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 22619 | 0UES3 | MID-AMERICA AEROTECH, LLC | | 22619 | 19156 | MOOG INC | | 22619 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 22619 | 94697 | MOOG INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.013 INCHES NOMINAL | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.255 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 0.910 INCHES MINIMUM AND | | 0.920 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3745 INCHES MINIMUM AND | | 0.3746 INCHES MAXIMUM | | SPECIAL FEATURES | OVER DIAMETER FOR UNFINISH IS 0.3740 TO 0.3741 INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0UES3 | | DESIGN CONTROL REFERENCE | 22619 |
|
|