|
|
|
National Stock Number:
5315-00-010-8275
Federal Supply Class:
5315
National Item Identification Number:
000108275
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 55A44B14-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 55A44B14-3 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 67A79B14 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 55A44B14-3 | 97342 | C T M CO INC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT | | MATERIAL | STEEL COMP 431 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | DIAMETER | 0.184 INCHES MINIMUM AND | | 0.186 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.330 INCHES MINIMUM AND | | 1.335 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.173 INCHES MINIMUM AND | | 0.177 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.378 INCHES NOMINAL | | UNDERCUT WIDTH | 0.017 INCHES MINIMUM AND | | 0.019 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | HEIGHT | 0.030 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 30003 | | DESIGN CONTROL REFERENCE | 67A79B14 |
|