5310-01-523-5654, WASHER,FLAT

National Stock Number:
5310-01-523-5654

Federal Supply Class:
5310

National Item Identification Number:
015235654

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10BN4AP	81205	THE BOEING COMPANY
BACW10BN4AP	Z03F0	BOEING DEFENCE AUSTRALIA LTD
BACW10BN4AP	Z8T75	BOEING DEFENCE AUSTRALIA LTD

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.251 INCHES MINIMUM AND 0.262 INCHES MAXIMUM
OVERALL DIAMETER	0.475 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	81205-BACW10BN MANUFACTURERS STANDARD
SPECIAL FEATURES	SUBASSEMBLY IS FAIRING INSTL-INBDMAIN FLAP; REFER TO BOEING I.P.C. BOE2448 27-51-30-01 NO. 95
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625, TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM

Click here to Register for Free 30-day Trial