5310-01-040-4747, WASHER,FLAT

National Stock Number:
5310-01-040-4747

Federal Supply Class:
5310

National Item Identification Number:
010404747

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

S8153-34-064C

70210

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

MATERIAL	STEEL COMP 1008 OR
	STEEL COMP 1009 OR
	STEEL COMP 1015 OR
	STEEL COMP 1018 OR
	STEEL COMP 1020 OR
	STEEL COMP 1022 OR
	STEEL COMP 1025 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-698 FED SPEC 1ST MATERIAL RESPONSE OR
	QQ-S-698 FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-698 FED SPEC 3RD MATERIAL RESPONSE OR
	QQ-S-698 FED SPEC 4TH MATERIAL RESPONSE OR
	ASTM A-108 ASSN STD 4TH MATERIAL RESPONSE OR
	ASTM A-108 ASSN STD 5TH MATERIAL RESPONSE OR
	QQ-S-698 FED SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-7959 MIL SPEC 5TH MATERIAL RESPONSE OR
	ASTM A-108 ASSN STD 6TH MATERIAL RESPONSE OR
	MIL-S-7952 MIL SPEC 7TH MATERIAL RESPONSE OR
	ASTM A-108 ASSN STD 7TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.160 INCHES MINIMUM AND
	0.180 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	0.300 INCHES MINIMUM AND
	0.320 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.064 INCHES NOMINAL

Click here to Register for Free 30-day Trial