| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE BASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL | ALUMINUM ALLOY 7075 BASE |
| MATERIAL | ALUMINUM ALLOY 7075 SHELL |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL CAP |
| MATERIAL | STEEL COMP 4130 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| NUT HEIGHT | 0.929 INCHES NOMINAL |
| NUT LENGTH | 1.406 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE WIDTH | 0.860 INCHES NOMINAL |
| PLATE THICKNESS | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SURFACE TREATMENT | ANODIZE BASE |
| SURFACE TREATMENT | ANODIZE SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 24 |