|
|
|
National Stock Number:
5310-00-570-9630
Federal Supply Class:
5310
National Item Identification Number:
005709630
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 106991517 | 09605 | BOMAG USA SUB OF UNITED DOMINION INDUSTRIES LTD | | T-50613 | 60038 | THE TIMKEN CORPORATION | | T50613 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 2.245 INCHES MINIMUM AND 2.260 INCHES MAXIMUM | | OVERALL DIAMETER | 3.370 INCHES MINIMUM AND 3.380 INCHES MAXIMUM | | MATERIAL | ALUMINUM OR COPPER ALLOY OR STEEL CORROSION RESISTING OVERALL | | SPECIAL FEATURES | 3 CUTOUTS EQUALLY SPACED 0.562 IN. DIA | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.020 INCHES NOMINAL |
|
|