|
|
|
National Stock Number:
5310-00-550-8018
Federal Supply Class:
5310
National Item Identification Number:
005508018
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 5508018 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.203 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ACTD | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 3.540 INCHES MINIMUM AND 3.550 INCHES MAXIMUM | | FLANGE THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HARDNESS RATING | 18.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL | STEEL COMP E3310 OR STEEL COMP 9310 OVERALL | | NOMINAL THREAD SIZE | 2.375 INCHES | | NUT DIAMETER | 3.057 INCHES MINIMUM AND 3.060 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM | | SURFACE TREATMENT | PHOSPHATE AND ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +2.2000 TO 2.2400 INCHES | | THREAD QUANTITY PER INCH | 3 | | THREAD SERIES | UNS |
|
|