|
|
|
National Stock Number:
5310-00-550-1009
Federal Supply Class:
5310
National Item Identification Number:
005501009
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 35140 | 00198 | PRATT & WHITNEY CANADA CORP | | A35140 | 00198 | PRATT & WHITNEY CANADA CORP |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.895 INCHES MINIMUM AND 0.905 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6312 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4640 OR STEEL COMP 8740 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.895 INCHES MINIMUM AND 0.905 INCHES MAXIMUM |
|
|