|
|
|
National Stock Number:
5310-00-515-9942
Federal Supply Class:
5310
National Item Identification Number:
005159942
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| FFW00100TYPEAGRADE1DESIGN1 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 1 STYLE AND 1 COMPOSITION | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL | | TEST DATA DOCUMENT | 81348-FFW100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
|
|