|
|
|
National Stock Number:
5310-00-515-8243
Federal Supply Class:
5310
National Item Identification Number:
005158243
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0126006-2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 0188-07 | 56232 | LOCKHEED MARTIN CORPORATION | | 1247315-3 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 1247315-3 | 27914 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL | | 1539349 | 64547 | HONEYWELL INTERNATIONAL, INC | | 17600-2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 236M0022P009 | 3B150 | RAYTHEON COMPANY | | 236M0022P009 | 49956 | RAYTHEON COMPANY | | 236M0022P009 | 54X10 | RAYTHEON COMPANY | | 26216437 | 80234 | VAPOR CORP SUB OF BRUNSWICK CORP | | 30723 | 96214 | RAYTHEON COMPANY | | 310-0046-000 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 420-17-0471 | 74684 | HUGHES CHRISTENSEN CO HUGHES DRILLING EQUIPMENT DIV | | 435-11-0471 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM | | OVERALL DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
|
|