|
|
|
National Stock Number:
5310-00-514-2711
Federal Supply Class:
5310
National Item Identification Number:
005142711
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121437 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 13084940-511 | 04939 | LOCKHEED MARTIN CORPORATION | | 130849V0-511 | 58260 | PROGRAM MANAGER ADVANCED ATTACK HELICOPTER BARCOM AMCPM-AAH | | 1754570-94 | 07187 | HONEYWELL INTERNATIONAL INC. | | B6-19 | 12129 | JOSLYN CORP MIDWEST REGION | | B6-19 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | S8154-38C010 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8154-38C010 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | OVERALL DIAMETER | 0.209 INCHES MINIMUM AND 0.212 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 70210-S8154 MANUFACTURERS STANDARD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.010 INCHES NOMINAL |
|