|
|
|
National Stock Number:
5310-00-512-6507
Federal Supply Class:
5310
National Item Identification Number:
005126507
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 501-3132-1 | 96682 | GENISCO TECHNOLOGY CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | NOMINAL THREAD SIZE | 1.140 INCHES | | NUT DIAMETER | 0.690 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.200 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD PITCH DIAMETERS | +0.2300 TO 0.2329 INCHES | | THREAD SERIES | UNS |
|
|