|
|
|
National Stock Number:
5310-00-506-9349
Federal Supply Class:
5310
National Item Identification Number:
005069349
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 47-641-078-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-641-078-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.063 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.087 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL | | COUNTERBORE DIAMETER | 1.4950 INCHES MINIMUM AND 1.4955 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 8 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 1.750 INCHES | | NUT DIAMETER | 2.050 INCHES NOMINAL | | NUT COUNTERBORE DEPTH | 0.670 INCHES NOMINAL NUT | | NUT STYLE | ROUND | | NUT THICKNESS | 1.320 INCHES NOMINAL | | SMALL END DIAMETER | 1.530 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS | | SURFACE TREATMENT | CADMIUM OVERALL EXCEPT THREADS | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UN | | UNDERCUT THICKNESS | 1.220 INCHES NOMINAL |
|
|