|
|
|
National Stock Number:
5310-00-482-4417
Federal Supply Class:
5310
National Item Identification Number:
004824417
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 800923 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 800923 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. |
|
Techincal Specification:
| CENTER HOLE LENGTH | 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | RECTANGULAR | | CENTER HOLE WIDTH | 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | P-44-E FSCM 16764 MFR REF 1ST TREATMENT RESPONSE OR P-10-C FSCM 16764 MFR REF 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OR DICHROMATE OVERALL | | THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
|
|