|
|
|
National Stock Number:
5310-00-480-3721
Federal Supply Class:
5310
National Item Identification Number:
004803721
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 092-33677 | 94697 | MOOG INC | | 092-33677-1 | 94697 | MOOG INC | | 092-33677-1 | 9P5N5 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-862 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM | | MATERIAL | STEEL COMP 324 OVERALL | | RECESS ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | E+1204 FSCM 94697 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|