|
|
|
National Stock Number:
5310-00-477-1162
Federal Supply Class:
5310
National Item Identification Number:
004771162
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 732048-8 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 95.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM | | HARDNESS RATING | 285.0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 0.467 INCHES MINIMUM AND 0.474 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.154 INCHES MINIMUM AND 0.164 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | TOP RECESS ANGLE | 85.0 DEGREES MINIMUM | | TOP RECESS DIAMETER | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
|
|