|
|
|
National Stock Number:
5310-00-477-0259
Federal Supply Class:
5310
National Item Identification Number:
004770259
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8157N33-050 | 59364 | HONEYWELL INTERNATIONAL INC. | | S8157N33-050 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8157N33-050 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 6TH MATERIAL RESPONSE OVERALL OR QQ-S-764 FED SPEC 7TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.195 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 70210-S8157 MANUFACTURERS STANDARD | | THICKNESS | 0.050 INCHES NOMINAL |
|
|