|
|
|
National Stock Number:
5310-00-473-4361
Federal Supply Class:
5310
National Item Identification Number:
004734361
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 426622 | 06959 | HANWHA AEROSPACE USA LLC | | 426622 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 426622 | 31340 | ENJET AERO BLOOMFIELD, LLC | | 426622 | 33436 | BETA ENGINEERING, INC. | | 426622 | 33617 | ELECTRO METHODS INC | | 426622 | 52661 | RTX CORPORATION | | AS426622 | 12776 | AIRCRAFT SUPPLIES | | 426622 | 77445 | RTX CORPORATION | | 426622 | 9Y765 | NUMET ACQUISITION INC | | 426622 | JA269 | TOKYO JUDOI KOGYO K.K. | | 426622 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.223 INCHES MAXIMUM | | OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 410 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
|
|