|
|
|
National Stock Number:
5310-00-453-2847
Federal Supply Class:
5310
National Item Identification Number:
004532847
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5330-99-606 | 99995 | NATO STOCK NUMBER ASSIGNED BY ANOTHER NATION | | 837-146 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 837-146 | K1464 | GOODRICH CONTROL SYSTEMS LTD T/A GOODRICH ENGINE CONTROL SYSTEMS | | 837-146 | U4287 | ROLLS-ROYCE CONTROLS AND DATA SERVICES LIMITED |
|
Techincal Specification:
| HOLE DIAMETER | 0.371 INCHES NOMINAL | | INSIDE LEFT CORNER CHAMFER ANGLE | 70.0 DEGREES NOMINAL | | INSIDE RIGHT CORNER CHAMFER ANGLE | 70.0 DEGREES NOMINAL | | OVERALL DIAMETER | 0.552 INCHES NOMINAL | | MATERIAL | COPPER ALLOY OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.046 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | CENTER HOLE SHAPE STYLE | ROUND |
|