|
|
|
National Stock Number:
5310-00-451-0056
Federal Supply Class:
5310
National Item Identification Number:
004510056
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 323526-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.560 INCHES MINIMUM AND 2.570 INCHES MAXIMUM | | OVERALL HEIGHT | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.109 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DEPTH | 0.089 INCHES NOMINAL | | RECESS DIAMETER | 1.430 INCHES MINIMUM AND 1.440 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|