|
|
|
National Stock Number:
5310-00-442-0966
Federal Supply Class:
5310
National Item Identification Number:
004420966
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10-7664 | 06840 | BENDIX CORP THE | | 10-7664 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 186440 | 31361 | WOODWARD, INC. | | 10-7664 | 59501 | UNISON INDUSTRIES LLC | | 10-7664 | 77820 | AMPHENOL CORP | | 10395044 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 19128 | 06840 | BENDIX CORP THE | | 41423 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 19128 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 2AG663 | 45152 | OSHKOSH CORP | | 19128 | 64547 | HONEYWELL INTERNATIONAL, INC | | 186440 | 66503 | WOODWARD, INC. | | 2AG663 | 75Q65 | OSHKOSH DEFENSE LLC | | 19128 | 83298 | ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE | | 7539002 | 076M6 | AMZ ALABAMA INC. | | 7539002 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | 7539002 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 8AX115 | 45152 | OSHKOSH CORP | | 8AX115 | 75Q65 | OSHKOSH DEFENSE LLC | | 41423 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.209 INCHES MINIMUM AND | | 0.229 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.029 INCHES MINIMUM AND | | 0.035 INCHES MAXIMUM |
|
|