|
|
|
National Stock Number:
5310-00-441-9773
Federal Supply Class:
5310
National Item Identification Number:
004419773
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1019120-001 | 05037 | ANACOMP, INC. | | 1019120-001 | 0HBH2 | LEXEL IMAGING SYSTEMS INC | | NAS1401-7-3 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| MATERIAL | STEEL OR | | STEEL COMP 1025 OR | | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-636-CANC FED SPEC 1ST MATERIAL RESPONSE AND | | MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE AND | | MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.443 INCHES MINIMUM AND | | 0.463 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | LENGTH | 0.720 INCHES MINIMUM AND | | 0.780 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.720 INCHES MINIMUM AND | | 0.780 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.090 INCHES NOMINAL | | SPECIAL FEATURES | ONE EDGE HAS 0.090 IN. RADIUS OR 45 DEG CHAMFER OPTIONAL |
|
|