|
|
|
National Stock Number:
5310-00-439-2515
Federal Supply Class:
5310
National Item Identification Number:
004392515
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 712-015-001 | 26055 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| BOSS DIAMETER | 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM OVERALL | | BOSS THICKNESS | 0.031 INCHES NOMINAL OVERALL | | CROSS-SECTIONAL SHAPE | ROUND NUT | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 360 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | NOMINAL THREAD SIZE | 0.086 INCHES | | NUT LENGTH | 0.255 INCHES MINIMUM AND 0.258 INCHES MAXIMUM | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES | UNC |
|
|