|
|
|
National Stock Number:
5310-00-438-9392
Federal Supply Class:
5310
National Item Identification Number:
004389392
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 279217 | 0KDP7 | KIDDE-FENWAL, LLC | | 279217 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | CA67682-001 | 0ZWK8 | MOOG INC. | | CA67682-001 | 3V697 | MISTEQUAY GROUP LTD | | N611097-3 | K4358 | SAFRAN ELECTRICAL & POWER UK LTD |
|
Techincal Specification:
| MATERIAL | WOOL OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.334 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.770 INCHES MINIMUM AND | | 1.790 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.208 INCHES MINIMUM AND | | 0.228 INCHES MAXIMUM | | SPECIAL FEATURES | FELT TO BE WATER AND FUNGUS PROOF TO FQS 404 98768 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 78062 | | DESIGN CONTROL REFERENCE | 279217 |
|
|