|
|
|
National Stock Number:
5310-00-438-2928
Federal Supply Class:
5310
National Item Identification Number:
004382928
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1788191-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1020 OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.751 INCHES MINIMUM AND | | 0.757 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.615 INCHES MINIMUM AND | | 1.635 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.120 INCHES MINIMUM AND | | 0.126 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | DRY FILM LUBRICATE ALL OVER IN ACCORDANCE WITH MIL-L-8937 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 1788191-2 |
|
|